614RBL-G2
The new 600RBL-G2 series split frame lathes provide the highest degree of portability for applications where lighter weight is an important advantage. The RBL-G2 clamshells are designed to sever and bevel 7″ through 60″ in-line tube and pipe. These clamshells feature precise, lightweight Vee-track roller bearings which produce low drag, minimize weight, and maximize portability. The RBL-G2 features adjustable bearings and tool slides to ensure long and dependable operation. Simultaneous sever and bevel operations are limited only by wall thickness.
Quicklinks:
Machine Package
Technical Specifications
Documents
Toolbits
Optional Accessories
| Wall Thickness: | **2.500" (63.5 mm) |
| Drive Options: |
Air 115V HD Electric 220V Electric Servo Hydraulic |
Machine Package Includes:
- Model 614RBL-G2 sub assembly
- Drive housing and cover
- Tripper Assembly
- Motor asssembly
- Wrench Kit
- Operators Manual
| Technical Specifications | ||
|---|---|---|
| Property | Inches | Metric |
| OD Mounting: | ***7.000" - 14.000" | (177.8 mm - 355.6 mm) |
| Wall Thickness: | **2.500" | (63.5 mm) |
| Feed Rate: (Per Revolution) | .0036" | (.09 mm) |
|
Weight: Machine |
150 lbs |
(68.2 kg) |
| Cutting Head Toolbit slots: | 2 | |
| Rotating head diameter: | 30.470" | (773.9 mm) |
| Main frame diameter: | 21.100" | (535.9 mm) |
|
Machine Width: Cutline to Machine Back |
6.250" |
(158.8 mm) |
|
Minimum Air Power requirement: Single Motor Dual Motor |
95 cfm - 90 psi 190 cfm - 90 psi |
(45 L/s) - (621 kPa) (90 L/s) - (621 kPa) |
| Minimum Electric Power requirement: |
20 Amps 110VAC @ 50/60 Hz 10 Amps 220VAC @ 50/60 Hz |
|
| Minimum Hydraulic Power Requirement: |
3 gpm - 15 gpm @ 1500 psi 15 gpm - 20 gpm @ 1000 psi |
(.19 L/s - .94 L/s) @ 10342 kPa (.94 L/s - 1.265 L/s) @ 6894 kPa |
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
***For tube sizes, contact Tri Tool Inc.
| Tool Bits | ||
|---|---|---|
| Property | Primary Angle | Secondary Angle |
| Right Hand Straight Bevel | 20°, 22.5°, 25°, 27.5°, 30°, 37.5°, 40°, 45° | |
| Right Hand Compound Bevel | 30°, 37.5° | 10°, 15° |
| Sever and Right Hand Bevel | 20°, 22.5°, 25°, 27.5°, 30°, 37.5°, 40°, 45° | |
| Sever and Left Hand Bevel | 20°, 22.5°, 25°, 27.5°, 30°, 37.5°, 40°, 45° | |
| Sever and Double Bevel | 20°, 22.5°, 25°, 27.5°, 30°, 37.5°, 40°, 45° | |
| Sever and Right Hand Compound Bevel | 30°, 37.5° | 10°, 15° |
| Sever and Left Hand Compound Bevel | 30°, 37.5° | 10°, 15° |
| Straight Sever | 1/4" Wide (6.35 mm) | |
| Straight Sever | 3/8" Wide (9.53 mm) | |
| Straight Sever | 1/2" Wide (12.7 mm) | |
| Optional Accessories | ||
|---|---|---|
| Property | Inches | Metric |
|
Model 765RVC HPU Single and Dual Hydraulic Motor |
480V, 380V, 240V | |
| Right Angle Air Motor | ||
| 600RBL OD Tracking Module Kit | ||
| Heavy Duty Electric Drive Motor | ||
| Counterbore Module Kit (CBM-3) | ||
| Servo Drive motor | ||
| Heavy Duty Sever Kit | ||
| Sandvik Sever Kit | ||
| Iscar Sever Kit | ||
| Tool Bit Spacer Kit | ||
| Full Support Pads | ||
| Template Tracing Module | ||
| Metal Job Site Shipping Cases | ||
| Air Caddy (Filter Regulator Lubricator) | ||